The water-powered oscillating monitors are designed to automatically discharge foam/water solution over a specific design area upon system activation. The oscillating mechanism is driven by a water drive wheel connected to a double reduction gearbox. To operate the water drive wheel, a small quantity of foam/water solution is diverted from the monitor inlet. The monitor requires no external wiring or hydraulic control for operation. The water drive wheel design is unique in that the flow of foam/water solution used does not require an inlet filter. This makes the oscillating mechanism highly reliable and less likely to fail.

• Unique water drive wheel design
• Arc of oscillation adjustable via 6 points
• Manual override capabilities
• Minimum operating pressure 40 psi (2.8 Bar)
• Maximum operating pressure 200 psi (14 Bar)
• Speed of oscillation adjustable from 0° - 30°/sec. (24 sec@100 psi)
• Flow of water/foam solution through water drive wheel at 50-psi (3.5 Bar) 5 gpm (19 lpm), 100 psi (7 Bar) 10 gpm (38lpm)
• Double reduction oil bath gearbox
• Grease fittings and two rows of stainless steel ball bearings at all rotation joints on monitor
• All brass and stainless steel construction
• Monitor has one handle for manual control
• Unit equipped with a garden hose test connection. This allows functional check of the oscillation mechanism without system flow
• UL listed