Darley Car Fire Blanket
The simplest and most effective car fire solution
The Darley Car Fire Blanket is the fastest, most efficient way to isolate and control an electric vehicle and traditional car fires. An ideal solution for parking garages, shopping centers, hospitals, hotels, boat ferries, car dealerships, metropolitan areas, etc.
Introducing Darley Car Fire Blanket, the most efficient on an EV’s or LI fires. The car fire blanket aims to reduce the smoke damage to buildings and other vehicles significantly, prevent the fire's spread (e.g., entering the surrounding vehicles), and extinguish the fire as quickly as possible.
Features
- Includes waterproof smart bag, carried as a backpack or wall-mountable cabinet
- A secure solution that handles fire in electric/hybrid/combustion engine automobiles.
- Suitable for most vehicle sizes (Contact us about custom sizes)
- Available as single or multiple-use car fire blankets.
- Controls any car (and electric vehicle) fire within seconds.
Benefits
- Simple, fast, efficient, and safe solution for controlling vehicle fires.
- Fire is contained under the blanket, reducing the amount of toxic gas and fumes released.
- Significantly reduce smoke damage, prevent the spread of fire to surrounding vehicles and property, and contain the fire as quickly as possible.
Who should use the Darley Car Fire Blanket
How to Use
Step1
- Ensure the blanket is sized appropriately for the vehicle.
- Unroll blanket.
- Center it behind the car or from the deployment direction.
Note: Full PPE and SCBA are to be worn at all times while deploying and handling any fire blanket exposed to the car. A minimum two-person deployment is needed.
Step 2
- Grab handles, raise them high in the air, and briskly walk the blanket over the burning vehicle.
Note: Keep direct contact with the blanket with the car to a minimum, as sharp edges can tear the blanket during deployment.
Step 3
- Center the blanket over the vehicle using the marking points on the blanket.
Note: Make sure the blanket is touching the ground on all sides. Step down on areas where the air may flow from under the blanket (there will always be some air entrained.)
Step 4
- Use the strap to wrap the base of the blanket around the base of the car.
Note: This will help cut off oxygen and make sure that the blanket doesn’t blow off in high winds. Tools or weights can be used to secure the blanket.
Step 5
- The blanket is deployed. Monitor with a thermal imaging camera.
Additional Notes: Best practice is also to spray the outside of the blanket with water. If possible, deploy an EV nozzle under the car to assist with cooling. The fire will continue to burn under the blanket. While there is no way to put the fire out, the blanket assists with containment and protection from exposures. By limiting oxygen, the fire will cool down but will not go out until the battery has completely burned out. Follow department SOPs and consult NFPA and other guidelines for handling the EV.
Fire in Electric Cars
Usable in Various Situations Follow steps 1-3. After the fire blanket has been placed tight to the ground, wait 2-3 minutes and listen. You have a thermal runaway if you hear strong fuzz sounds about every 3-15 seconds. Leave the fire blanket on until the sound stops. This is a small fire that goes from cell to cell. The fire blanket will prevent the small fire from spreading elsewhere in the car.
Note: The car fire blanket is not approved for magnesium fires.
Product Specifications
| Single-Use | Reusable | |||
| SKU | BP819 | BP822 | BP818 | BP821 |
| Size | 20' x 26' | 20' x 30' | 20' x 26' | 20' x 30' |
| Weight | 54 lbs. | 68 lbs. | 62 lbs. | 71 lbs |
| Storage | Waterproof Bag | Waterproof Bag | Waterproof Bag | Waterproof Bag |
Technical Information
Single-Use Darley Care Fire Blanket
| Fabric | Tolerance | Test Methods | ||
| Yarn | WARP WEFT |
68 X 2 or 136 tex 68 x 2 or 136 txt |
+ / -5% | ISO 4602 |
| Thread Count | WARP WEFT |
19.0 per 1cm 11.0 per 1cm |
+ / - 5% | DIN EN 1049 |
| Thickness | 0.43mm | + / - 10% | DIN ISO 4603 | |
| Tensile Strength (typical) |
WARP WEFT |
>- 3000 n/5cm >- 4000 n/5cm |
EN ISO 13934-1 | |
| Weight | 520gm 2 | + / - 5% | DIN EN 12127 | |
| Coating | Fire retardant polymer coating on both sides | |||
Multiple Use Care Fire Blanket
| Fabric | Tolerance | Test Methods | ||
| Yarn | WARP WEFT |
68 X 2 or 136 tex 68 x 2 or 136 txt |
+ / -5% | ISO 4602 |
| Thread Count | WARP WEFT |
20.0 per 1cm 12.0 per 1cm |
+ / - 5% | DIN EN 1049 |
| Thickness | 0.43mm | + / - 10% | DIN ISO 4603 | |
| Tensile Strenght (typical) |
WARP WEFT |
>- 4000 n/5cm >- 5000 n/5cm |
EN ISO 13934-1 | |
| Weight | 550gm 2 | + / - 5% | DIN EN 12127 | |
| Coating | Fire retardant polymer coating on both sides | |||
Product Information
| Single Use | Reusable | |||
| SKU | BP819 | BP822 | BP818 | BP821 |
| Size | 20' x 26' | 20' x 30' | 20' x 26' | 20' x 30' |
| Weight | 54 lbs. | 68 lbs. | 62 lbs. | 71 lbs |
| Storage | Waterproof Bag | Waterproof Bag | Waterproof Bag | Waterproof Bag |
Technical Information
Single Use Darley Care Fire Blanket
| Fabric | Tolerance | Test Methods | ||
| Yarn | WARP WEFT |
68 X 2 or 136 tex 68 x 2 or 136 txt |
+ / -5% | ISO 4602 |
| Thread Count | WARP WEFT |
19.0 per 1cm 11.0 per 1cm |
+ / - 5% | DIN EN 1049 |
| Thickness | 0.43mm | + / - 10% | DIN ISO 4603 | |
| Tensile Strength (typical) |
WARP WEFT |
>- 3000 n/5cm >- 4000 n/5cm |
EN ISO 13934-1 | |
| Weight | 520gm 2 | + / - 5% | DIN EN 12127 | |
| Coating | Fire retardant polymer coating on both sides | |||
Multiple Use Care Fire Blanket
| Fabric | Tolerance | Test Methods | ||
| Yarn | WARP WEFT |
68 X 2 or 136 tex 68 x 2 or 136 txt |
+ / -5% | ISO 4602 |
| Thread Count | WARP WEFT |
20.0 per 1cm 12.0 per 1cm |
+ / - 5% | DIN EN 1049 |
| Thickness | 0.43mm | + / - 10% | DIN ISO 4603 | |
| Tensile Strenght (typical) |
WARP WEFT |
>- 4000 n/5cm >- 5000 n/5cm |
EN ISO 13934-1 | |
| Weight | 550gm 2 | + / - 5% | DIN EN 12127 | |
| Coating | Fire retardant polymer coating on both sides | |||
Darley
View more by DarleyDarley Exclusive gear is our private label line of firefighting equipment. Only the best products wear the Darley logo.
| Manufacturer | Darley |
|---|
