Challenger Forcible Entry Training Door System

K-12 Saw Tree Side
 

Used for cutting up to 3/4" #6 rebar at three different heights and angles. This feature simulates cutting security bars on doors and windows to gain access. It also provides an excellent opportunity for K-12 saw training time and to teach proper body ergonomics when using the K-12 in different positions to lessen fatigue and risk of injury.

Hinge or Flat Plate
Cutting Simulator

Cut and pull commercial hinges, pull hinge pins, and cut flat plates up to 5" x 3/8" thick. Using a flat plate is just as realistic and is a much cheaper alternative to hinges. 

Combination and Pad Lock
Cutting/Breaking

Used to show how to cut, strike and break the many different types of keyed and combination locks sometimes encountered on doors, gates and hatches.

Commercial Rim Lock
Pulling Simulator

Use your "K" tool as designed and pull our commercial rim-style lock simulators. These simulators can and have been pulled as many as 60-80 times (depending on how overly aggressive the user is) before replacement is necessary. 

Commercial/Residential Deadbolt
Lock Pulling Simulator (patented)

Use your "R" tool as designed and pull our commercial/residential deadbolt-style lock simulators. These simulators can and have been pulled as many as 60-80 times (depending on how overly aggressive the user is) before replacement is necessary.

Through-the-Lock
Simulator

This simulator allows the student/firefighter to manipulate actual commercial storefront and residential deadbolt latch mechanisms after the lock simulators have been pulled to complete the through-the-lock forcible entry task.

K-12 Plunge Cut Window
(patented)

This feature demonstrates plunge-cutting steel commercial doors with a K-12 saw that utilizes panic bar hardware. Use a framing square through the cut groove and hook and release the panic bar, thus opening the door. You can achieve up to 25 cuts in each plate before replacement is necessary. This feature may also be used with glass or plexiglass for meeting other NFPA 1001 JPRs for window forcible entry.

Custom Built Heavy-Duty
Panic Bar

The real operating panic bar is used in conjunction with the plunge-cutting simulator described in the K-12 Plunge Cut Window.

Hydraulic Forcible Entry
 

Designed for all Hydraulic Rabbet tools both manual and battery operated. (THE DOOR IS NOT DESIGNED FOR BATTERING RAM USE)

Inward Forcing
 

This feature uses an automatic realistic spring loaded 3/4" latch bolt and a wooden 2x2 for realistic resistance breaching. This feature may be used with or without the wooden 2"x2".

Outward Forcing
 

This feature uses an automatic realistic spring loaded 3/4" latch bolt and a wooden 2x2 for realistic resistance breaching. This feature may be used with or without the wooden 2"x2" as well.

K-12 Saw Tree Side
 

Used for cutting up to 3/4" #6 rebar at three different heights and angles. This feature simulates cutting security bars on doors and windows to gain access. It also provides an excellent opportunity for K-12 saw training time and to teach proper body ergonomics when using the K-12 in different positions to lessen fatigue and risk of injury.