My Quote
My Cart

Halo Particle Filter Hood

SKU: BN345

|

In Stock

|

Ships via Standard Ground

Typically ships in 1-2 Days

Manufacturer Part Number:

HALO Hood

$108.95
Majestic Fire Apparel Halo Particle Filter Hood features strategically placed filter fabric to protect the head and neck.
Majestic Fire Apparel

Majestic Fire Apparel

View more by Majestic Fire Apparel

Majestic offers fire retardant hoods featured are UL certified to be compliant with NFPA 1971 current edition. Industrial, Welding, and Electrical hoods, apparel and accessories - many of which are third party certified.

HALO Hood is color blocked to show area were HALO particle filter fabric is located (GREY) fabric area contains the HALO particle filter fabric)

HALO filter fabric is strategically placed to protect high exposure areas of the head and neck (areas that are not covered by the SCBA facepiece, helmet, and coat collar)

DESIGN

Head Design Double Seam replaces traditional center seam

Double Seam Area Width 4-5" (all measurements +5/ .5)

Face Opening Area Ultra C6 rib knit material allowing for maximum stretch, ease of donning and doffing

Back of Head (nape of neck area) Has elastic encapsulated in nape of neck area for contour fit (PATENT PENDING)

Bib(Apron) Design Longer length, notched shoulder bib design

LAYERS

GREY AREA=contains filter fabric

  • 3 ply material (outer to inner)
  • INT C6 GREY PW / HALO / INT C6 GREY PW

BLACK AREA

  • 2 ply material (outer to inner)
  • Ultra C6 / Ultra C6

LENGTH

OVERALL LENGTH 23" (all measurements +1 / -0)

FACE OPENING

Full Face Opening Circular Measurement

Sewn with a heavy duty 5/8" elastic. Elastic is encapulated in material and cover stitched

Elastic Face Opening stretches to accommodate a circumference of at least 31" (800 mm) for ease of donning, snug fit, and propper seal with SCBA. Hood face opening retention shall have an average percentage retention of less than 110 percent

BINDING

Binding of same fabric material to enhance design with a finished look

SEAMS

Thread: BLACK/TAN

Safety lock cover stitch of seams

Seam burst strenght tests are unsurpassed in industry - 2X or 3X NFPA minimum!

AIT (ADVANCED INSPECTION THREAD) Hoods regularly have thread that matches the color of the hood (white on white / black on black). HALO hoods are sewn with contrasting thread color (TAN), which is especially important for inspection of gear. Any compromise to thread, seams, stitching is easily detected with AIT thread.

SIZING

UNIVERSAL SIZE

HALO hood has elastic in the back nape of neck area - which will stretch to accommodate larger head sizes. (PATENT PENDING)

HALO hood has elastic in the back nape of neck area - which will reduce bulk of fabric ensuring a contour fit. (PATENT PENDING)

LABELING AND USER INFORMATION

OWNER IDENTIFICATION On the label the area of PROPERTY OF: _________. Today every Majestic hood is manufactured with our NEW OWNER ID label. Simply identifying your ownership with any permanent marker, directly on label.

Warning & User information Guide - each hood has a Warnings & Users Infromation Guide attached with imperative information. Please review before wearing.

HALO hoods are embroidered with HALO logo-to ensure that when you want that filter fabric protection, at a quick glance you know it's there!!!!

CLEANING, PRECAUTIONS, AND STORAGE

Machine wash only using regular detergent. Do not use chlorine bleach or detergents containing chlorine. Do not use fabric softeners or detergents containing fabric softeners. Water temperature not to exceed 130 degrees F. Do not wring hood. Squeeze hood to remove excess water. Shape and lay flat in a dry, cool, shaded location to dry. Or tumble dry, low heat. Do not commercially dry clean. Do not store your hood in direct sunlight.

CERTIFICATIONS

NFPA 1971-2013 UL Certified

Complies with CAL-OSHA Requirements Sections 3406 and 3410(d) and OSHA Rule 29 CFR Part 1910, 269

WARRANTY

Your protective hood is warranted to be free from defects in material and workmanship for one year. This warranty does not cover normal wear or unusual exposures, including abrasive wearing of close-tolerance accessories-such as voice amplifiers. This warranty is in lieu of all other warranties, expressed or implied, including but not limited to, implied warranties or marketability and/or fitness for a particular purpose. MFA, Inc shall not be liable for incidental or consequential damages.

Material Content: 100% HALO Particle Filter Fabric

FABRIC PERFORMANCE VALUES


THERMAL PROTECTIVE PERFORMANCE (TPP)
GREY AREA in HEAD as received 48.6 cal/cm2
  after 5 washes 53.4 cal/cm2
BLACK AREA in HEAD and BIB as received 33.1 cal/cm2
  after 5 washes  

HOOD MATERIAL BURST STRENGTH
  Ultra C6 402 N
  INT C6 GREY PW 519 N

FLAME RESISTANCE TEST
AFTERFLAME (wales x courses) 
Ultra C6 AFTER FLAME as received  0 seconds
  after 5 washes 0 seconds
INT C6 GREY PW AFTER FLAME  as received  0 seconds
  after 5 washes 0 seconds
HALO AFTER FLAME as received  .5 seconds
  after 5 washes .5 seconds

CHAR LENGTH (wales x courses)
Ultra C6 AFTER FLAME as received 4 mm x 4 mm
  after 5 washes 3 mm x 3 mm
INT C6 GREY PW AFTER FLAME as received 3 mm x 2 mm
  after 5 washes 2 mm x 1 mm
HALO AFTER FLAME as received  25 mm x 33 mm
  after 5 washes 31 mm x 22 mm

CLEANING SHRINKAGE RESISTANCE TEST
Hood Measurement   0%
Face Opening Measurement   5%

HEAT AND THERMAL SHRINKAGE RESISTANCE TEST
Hood Measurement as received 2%
  after 5 washes 0%
Face Opening Measurement as received 3%
  after 5 washes 0%

SEAM BREAKING STRENGTH TEST
Bib Attachment, Seam on Crown (Double Seam)   770 N
Face Opening Attachment Seam   846 N

MELT, DRIP, IGNITE, SEPARATE WHEN EXPOSED TO FLAME
    None

Product Brochure

 Majestic Fire Apparel Halo Particle Filter Hood Spec Sheet

More Information
FeaturedYes
Write Your Own Review
You're reviewing:Halo Particle Filter Hood