My Cart

Ready Rack 22G Soft-Mount Extractor

SKU: BP208

Ships Directly From the Manufacturer

Ships via freight

Typically ships in 3-5 Days

This commercial extractor is designed with a front-load design and soft-mount installation, making it easy to use and install. It can wash up to 4 pieces of turnout gear per load, ensuring your team’s gear is always ready for action. The stainless steel inner tub and fewer moving parts mean this machine is built to last, offering you excellent value for money. Plus, it has various washing programs tailored for PPE gear and station towels, ensuring optimal cleaning results every time.

For accurate shipping charges, click Get a Quote. 

Ready Rack Extractor 22 Front View
Ready Rack Extractor 22 Front View Ready Rack Extractor 22 - Quarter Turn View Ready Rack Extractor 22 - Side View Ready Rack Extractor 22 - Rear View

The EW22G Soft-Mount Extractor is a commercial extractor designed for tumbling PPE gear. It’s a front-load design with a soft-mount installation that meets NFPA 1851:2020 requirements.

Key Features

  • Capacity: Can wash 4 pieces of turnout gear per load.
  • Tub Material: Stainless steel inner tub with a capacity of 3.7 cu. ft.
  • Installation: Easy soft-mount installation.
  • Durability: Fewer overall moving parts promote longer life expectancy.
  • Compliance: Meets NFPA 1851:2020 Requirements.
  • Warranty: Comes complete with manual/manufacturer’s warranty.
  • Hoses: Hot and Cold hoses come with the unit.
  • Washing Programs: PPE Washing Programs have a Spin Cycle G-Force Under 100 G’s, while Towels Washing Program has a Spin Cycle G-Force of 451 G’s.
  • Backflow Preventer: A backflow preventer is built into the supply dispenser.

Electrical

The extractor runs on 120 volts, consuming 110-160 watt hours per load. It uses a fuse rated at 250V, 12 A (Time Delay). A 6’ electrical cord with a plug comes off the back of the extractor.

Plumbing

There is a 6’ flexible drain hose that comes off the back of the extractor. The drain hose should be inserted into a 2" standing drain pipe or attached to a nearby slop sink or laundry tub.

Wash Cycles

The extractor offers several wash cycles, including:

  • Blood Bourne Hot Wash Cycle (30 minutes)
  • Outer Shells / Liners Warm Wash Cycle (57 minutes)
  • Cold PPE Cold Wash Cycle (52 minutes)
  • Towels Warm Wash Cycle (47 minutes)
  • Super Wash Extended Warm Wash Cycle (63 minutes)
  • Water usage, on average, will be about 13-14 gallons per cycle, varying depending on the water absorption of the fabric. Fill time and drainage time is 4-5 gal/min.

Introducing the Ready Rack Extractor 22G, the ultimate cleaning solution for your turnout gear. Engineered for performance, this washer is designed to handle fire departments' and first responders' most stringent requirements, ensuring their gear is thoroughly cleaned and ready for action.

Built with robust technology, the Extractor 22 uses high-efficiency washing power to remove the gear's toughest dirt, grime, and contaminants, prolonging its lifespan while maintaining safety standards.

Key Features

  • High-Capacity Washing: Extractor 22 has a large 22 lbs capacity and holds four pieces of turnout gear, ensuring it can simultaneously handle multiple sets of turnout gear.
  • Optimized Cleaning Program: Follows NFPA 1851 to cater to the specific needs of turnout gear. This washer ensures a thorough clean without damaging the gear's protective properties.
  • Advanced Spin Technology: The advanced spin speed options ensure efficient water extraction, reducing drying time and increasing gear longevity.
  • Durable Construction: The stainless steel drum is highly durable and is built to last, ensuring the machine will stand up to rigorous use.
  • Easy Operation: The user-friendly control panel makes selecting the optimal settings for your gear easy.

Specifications

  • 22 lbs. capacity holds four pieces of turnout gear
  • Front-load design
  • Standard power hookup (120v ~60Hz)
  • Utilizes standard plumbing hookups
  • Soft mount design, easy install
  • Stainless Steel Design
  • Compatible with automatic soap injector
  • 30.5" L x 30.5" D x 38.7" H
  • Depth with Door Open: 52.6"
  • Weight: 190 lbs.
  • Ship Weight: 275 lbs.
  • Max Spin: 100 G Force

 

  • Meets current NFPA 1851 recommendations
  • Front load design
  • Commercial quality construction
  • 22 lb capacity / 2 sets of gear
  • Automatic soap dispenser compatible
  • Utilizes standard plumbing hookups
  • Requires only 120v electrical
  • Soft-mount design, easy install

ELECTRICAL SPECIFICATIONS: 120V/60HZ - Recommended Breaker - 20 amp

Dimensions:48” x 40” x 49” Weight: 260 lbs

Product Brochure

Groves Extractor 22 Brochure

Manufacturer Part Number
EW22G
Groves Inc

Groves Inc

View more by Groves Inc

Groves Ready Rack gear racks and storage solutions are assembled in the USA and supported by a network of knowledgable staff including current firefighters.

Technical Data
Manufacturer Groves