My Cart

Ready Rack 35G Soft-Mount Extractor

SKU: BP242

Ships Directly From the Manufacturer

Ships via freight

Typically ships in 1-2 Weeks

The EW35G Soft-Mount Extractor is a state-of-the-art machine designed to easily handle Personal Protective Equipment (PPE) gear. Its high capacity, easy installation, and user-friendly controls make it the perfect addition to any commercial laundry setup. Plus, with fewer moving parts, it's built to last.

For current pricing and shipping charges to your door, click Get a Quote. 

Ready Rack 35G Soft-Mount Extractor
Ready Rack 35G Soft-Mount Extractor Ready Rack 35G Soft-Mount Extractor Ready Rack 35G Soft-Mount Extractor

The EW35G Soft-Mount Extractor is a commercial-grade laundry solution that handles Personal Protective Equipment (PPE) gear. It meets the stringent requirements of NFPA 1851:2020, ensuring the highest safety and performance.


Capacity: Can wash 4-6 pieces of turnout gear per load with a stainless steel inner tub (capacity: 5.2 cu. ft).
Installation: Easy soft-mount installation with fewer overall moving parts, promoting longer life expectancy.
Compliance: Meets NFPA 1851:2020 Requirements.
Warranty: Comes complete with a manual/manufacturer’s warranty.
Included Accessories: Hot and Cold hoses come with the unit.
Washing Programs: PPE Washing Programs have a Spin Cycle G-Force Under 100 G’s, while the Towels Washing Program has a Spin Cycle G-Force of 342 G’s.
Safety Feature: A backflow preventer is built into the supply dispenser.



The extractor runs on 120 volts (watts per load: 110-160 watt-hours) with a fuse of 250V, 12 A (Time Delay). A 6’ electrical cord with a plug comes off the back of the extractor.


There is a 6’ flexible drain hose that comes off the back of the extractor. The drain hose should be inserted into a 2" standing drain pipe or attached to a nearby slop sink or laundry tub.

Wash Cycles

The EW35G Soft-Mount Extractor offers several wash cycles:

  • Blood Bourne Hot wash cycle to be used with PPE gear disinfectant laundry solution (Total time - 30 minutes).
  • Outer Shells / Liners NFPA 1851 warm wash cycle for PPE outer shells & liners (Total time - 57 minutes).
  • Cold PPE cold wash cycle (Total time - 52 minutes).
  • Towels Warm wash cycle for station towels & rags (Total time - 47 minutes).
  • Super Wash Extended warm wash cycle for heavily soiled PPE gear (Total time – 63 minutes).
  • Water usage, on average, will be about 15-16 gallons per cycle, varying depending on water absorption of the fabric. Fill time and drainage time is 4-5 gal/min.


The Ready Rack Extractor 30 is a specially-designed extractor that offers advanced features to ensure safety, longevity, and optimal performance. This innovative appliance follows the stringent NFPA 1851 guidelines, ensuring proper care and maintenance of Personal Protective Equipment (PPE), thus making it last longer and enhancing firefighter safety.

Boasting a high-capacity 30lb drum, the EW30 can accommodate three to six pieces of turnout gear per cycle. This front-loading washer includes preprogrammed wash cycles specifically designed for the firefighting industry. This intuitive feature ensures optimal cleanliness of PPE while preserving its integrity.

TheReady Rack Extractor 30 features a soft-mount design for ease of installation and uses standard plumbing and power hookups (120v/60Hz - Recommended Breaker - 20amp). An automatic soap injector can be connected for added convenience, promoting efficient washing with the correct dosage of detergent.


  • Front-load design for easy loading and unloading
  • The soft-mount design ensures easy installation
  • High-capacity, 30lb drum, holds three to six pieces of turnout gear
  • Preprogrammed wash cycles tailored to the firefighting industry
  • Complies with NFPA 1851 guidelines for proper PPE care
  • Standard power and plumbing hookups
  • Compatible with automatic soap dispensers for efficient washing


  • Dimensions: 32.0" L x 29.5" D x 42.0" H
  • Depth with door open: 53.9"
  • Weight: 221 lbs
  • Shipping Weight: 300 lbs
  • Permissible Water Pressure: 20 - 120 psi
  • Max Spin: 100 G Force
  • Power Supply: 120 V~ 60 Hz

Safeguard your firefighter PPE with The Ready Rack Extractor 30, designed to meet the rigorous demands of the firefighting industry. This purpose-built washing solution makes cleaning more efficient, safe, and compliant.


  • Meets current NFPA 1851 recommendations
  • Front load design
  • Commercial quality construction
  • Automatic soap dispenser compatible
  • Utilizes standard plumbing hookups
  • Requires only 120v electrical
  • Soft-mount design, easy install
  • Easy to use, preprogrammed wash cycles
  • 30 lb. capacity / 3-4 sets of gear
  • Requires only 120v electrical
  • Dimensions: 29"L x 32"D x 40.8"H
  • Weight: 221 lbs.

Product Brochure

Groves Extractor 30 Brochure

Manufacturer Part Number
Groves Inc

Groves Inc

View more by Groves Inc

Groves Ready Rack gear racks and storage solutions are assembled in the USA and supported by a network of knowledgable staff including current firefighters.

Technical Data
Manufacturer Groves