Single Speed Motor
The EBS-16 comes standard with a single-speed electric motor with an output of 0.3 HP. This specific motor is matched perfectly with the fan blade's size and pitch to produce the most effective air movement possible. This 16″ smoke ejector also has a 1.5 HP motor for high CFM needs.
Hang/Suspend the EBS-16
One of the key advantages to the EBS-16's lightweight and compact design is its ability to be quickly suspended in nearly any door or window way. Want to ventilate a difficult-to-access and crowded interior space through a window? No problem. NOTE: For safety, we encourage the use of our Door Bar Holder (300-141) and Hanging Bracket Set (300-142) to hang the Tempest EBS-16.properly
At 47 lbs, the Tempest EBS-16 is one of the more lightweight ventilation units available. Its reduced dimensions and frame design allow users to carry it to and from the work site easily.
Formed & Welded Roll-Cage Frame
Not an ounce of Tempest's well-known reliability and durability that comes standard on every fan was sacrificed to meet this unit's small stature and lightweight. The frame is entirely steel, all molded, formed, and welded into a sturdy roll-cage design. Like every Tempest, it's built to last on the job site.
AirFlex Composition Impeller
Paired specifically with its equipped 0.3 HP or 1.5 HP motor, the uniquely designed impeller "wings" deliver the maximum air volume (cfm), velocity, and pressure possible. The impeller blades are made from a high-strength composite fiberglass reinforced polyamide. Composite blades require less torque from the engine to spin, resulting in increased CFM. Composites also provide increased safety, as the blades are designed to disintegrate upon impact with any foreign object. Aluminum or other metal blades may chip or fragment when structural integrity is compromised, throwing potentially dangerous shrapnel in any direction.
Originally intended for confined space ventilation, the EBS-16 is small enough to hang, sit, or fit in a wide array of tight spaces. Whether space is a factor for storing or using ventilation, our box fan will suit you perfectly.
Front and rear safety grilles feature a continuous spun wire body with four tie-point bars. Meets strict European CE Safety Standards.
Negative Pressure Ventilator
Negative Pressure Ventilation (NPV), as opposed to Positive Pressure Ventilation (PPV), is the method of using a fan to suck out unwanted particulates rather than blowing them out. The Tempest EBS-16's size and design are most effective and efficient at NPV, although PPV may still be somewhat utilized.
|Negative Pressure Ventilation Fan – Smoke Ejector
|Single Speed Electric – 0.3 HP or 1.5 HP Motor
GFCI Compatible: Designed to Run on 15 AMP Circuit – Actual Draw Approx. 5.2 AMP
110V / 60Hz Standard (Other Options may be Available)
|16″ Diameter Assembly Made Up of 6, AirFlex Fiberglass Reinforced Polyamide Blades
|Integral Component of Frame
|Continuous Circular Wound, Zinc-Plated Steel w/ 4 Tie Points for Additional Safety
Meets UL & European CE Safety Standards
|Formed and Welded Sheet Metal Construction with Powder-Coat Finish
|18″, 21″, 24″ and 27″ Models: 8″ Non-Pneumatic w/ Steel Hubs
Tempest TechnologyView more by Tempest Technology
Tempest is the industry leader and pioneer in development of positive pressure ventilation products.